Highly alkaline stable anion exchange membranes from nonplanar polybenzimidazole with steric hindrance backbone

The anion exchange membranes (AEMs) with both high ionic conductivity and alkali stability are always the research focus of the AEM fuel cells. Here, a novel nonplanar polymer for AEMs manufacture, mPBI‐TP‐x‐R, with excellent hydroxide stability and satisfactory processability is reported for the first time. The serial mPBI‐TP‐x resins with steric hindrance were prepared by copolymerization among 3,3′,4,4′‐tetraaminobiphenyl, isophthalic acid and tetraphenyl‐terephthalic acid (TP) in different ratios under microwave condensation. The copolymers mPBI‐TP‐x were quaternized at N1/N3‐sites of benzimidazole unit in backbone with alkyl groups (R?CH₃, C₂H₅, n‐C₃H₇, or n‐C₄H₉) to prepare soluble ionomers, and the corresponding membranes in hydroxyl ion form were prepared by a solution casting method and subsequent ion‐exchange process. The chemical structure of all membranes was characterized using FTIR and ¹H NMR spectroscopy. The properties of ion exchange capacity, water uptake, swelling ratio, tensile strength, ionic conductivity, and alkaline stability were measured. Among the prepared membranes, the mPBI‐TP‐15%‐(n‐Bu) exhibited the excellent alkaline stability (only degradation ca. 5% under 1M NaOH aqueous solution at 60 °C for 800 h) and satisfactory OH^? conductivity (46.66 mS/cm at 80 °C). The current research provides a useful exploration to commercial application of alkaline fuel cell. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 1087–1096     

A Flexible Framework for Cubic Regularization Algorithms for Nonconvex Optimization in Function Space

We propose a cubic regularization algorithm that is constructed to deal with nonconvex minimization problems in function space. It allows for a flexible choice of the regularization term and thus accounts for the fact that in such problems one often has to deal with more than one norm. Global and local convergence results are established in a general framework.     

Improving the approximation of the probability density function of random nonautonomous logistic‐type differential equations

In this paper, we address the problem of approximating the probability density function of the following random logistic differential equation: P^′(t,ω)=A(t,ω)(1?P(t,ω))P(t,ω), t∈[t₀,T], P(t₀,ω)=P₀(ω), where ω is any outcome in the sample space Ω. In the recent contribution [Cortés, JC, et al. Commun Nonlinear Sci Numer Simulat 2019; 72: 121–138], the authors imposed conditions on the diffusion coefficient A(t) and on the initial condition P₀ to approximate the density function f₁(p,t) of P(t): A(t) is expressed as a Karhunen–Loève expansion with absolutely continuous random coefficients that have certain growth and are independent of the absolutely continuous random variable P₀, and the density of P₀, , is Lipschitz on (0,1). In this article, we tackle the problem in a different manner, by using probability tools that allow the hypotheses to be less restrictive. We only suppose that A(t) is expanded on L²([t₀,T]×Ω), so that we include other expansions such as random power series. We only require absolute continuity for P₀, so that A(t) may be discrete or singular, due to a modified version of the random variable transformation technique. For , only almost everywhere continuity and boundedness on (0,1) are needed. We construct an approximating sequence of density functions in terms of expectations that tends to f₁(p,t) pointwise. Numerical examples illustrate our theoretical results.     

A problem of determining a special spatial part of 3D memory kernel in an integro‐differential hyperbolic equation

The inverse problem of determining 2D spatial part of integral member kernel in integro‐differential wave equation is considered. It is supposed that the unknown function is a trigonometric polynomial with respect to the spatial variable y with coefficients continuous with respect to the variable x. Herein, the direct problem is represented by the initial‐boundary value problem for the half‐space x>0 with the zero initial Cauchy data and Neumann boundary condition as Dirac delta function concentrated on the boundary of the domain . Local existence and uniqueness theorem for the solution to the inverse problem is obtained.     

Multifunctional land‐use value mapping and space type classification: A case study of Puge County,China

Land exhibits diverse functions under the combined influence of natural and human forces. A production–living–ecology functional classification system was constructed by integrating land, ecosystem, and landscape functions. The land functional value was calculated by systematically integrating ecosystem service value assessments. The primary and secondary functions, as well as combinations of different land‐use types, were determined using vertical and horizontal comparison methods. The production–living–ecology ranges were then delineated in Puge County, which is a typical mountain county in China. The production–living–ecology functions identified were well connected with the current land‐use types. The “production–living–ecology” space in Puge County showed obvious multifunctionality and agglomeration. The function identification system proposed in this paper integrated multiple methods, overcame the difficulty of direct quantitative identification of land functions. The methods used to map and quantify land function will enhance our ability to understand and model land system changes and adequately inform policies and planning. Summary for Managers

• The function valuation method constructed in this paper could be used to reflect the multifunctionality and importance of land use and provide guidance and a quantitative basis for regional development planning.
• The spatial classification results provided in this paper could offer a valuable reference for the land management department to scientifically formulate land use planning.
• Under the goal of creating a group‐type urban development pattern and constructing an ecological protection pattern in Puge County, the hotspot analysis results of this paper can provide decision‐making tools and alternative spatial plans.

     

Densitometry and indirect normal‐phase HPTLC–ESI–MS for separation and quantitation of drugs and their glucuronide metabolites from plasma

The present work describes novel methods using densitometry and indirect or off‐line high performance thin‐layer chromatography–mass spectrometry (HPTLC–MS) for the simultaneous detection and quantification of asenapine, propranolol and telmisartan and their phase II glucuronide metabolites. After chromatographic separation of the drugs and their metabolites the analytes were scraped, extracted in methanol and concentrated prior to mass spectrometric analysis. Different combinations of toluene and methanol–ethanol–n‐butanol–iso‐propanol were tested for analyte separation and the best results were obtained using toluene–methanol–ammonia (6.9:3.0:0.1, v/v/v) as the elution solvent. All of the drug–metabolite pairs were separated with a homologous retardation factor difference of ≥22. The conventional densitometric approach was also studied and the method performances were compared. Both of the approaches were validated following the International Conference on Harmonization guidelines, and applied to spiked human plasma samples. The major advantage of the TLC–MS approach is that it can provide much lower limits of detection (1.98–5.83 pg/band) and limit of quantitation (5.97–17.63 pg/band) with good precision (?3.0% coefficient of variation) compared with TLC–densitometry. The proposed indirect HPTLC–MS method is simple yet effective and has tremendous potential in the separation and quantitation of drugs and their metabolites from biological samples, especially for clinical studies.     

Effect of quality control on the proliferation of the extract from Taraxacum mongolicum Hand.‐Mazz. in Lactobacillus plantarum

In recent years, the fingerprint of high‐performance liquid chromatography has been extensively applied in the identification and quality control of traditional Chinese medicine. It can be a potential protocol for assessing the authenticity, stability and consistency of traditional Chinese medicine and guaranteeing the expected biological activity. In this paper, a method using high‐performance liquid chromatography to identify and control the quality of the extract of Taraxacum mongolicum Hand.‐Mazz. (TME) was established. With this method, the correlation coefficients of the similarity of 10 batches were ≥0.994. The TME displayed a steady proliferative effect in Lactobacillus plantarum. In brief, this study successfully built a reliable, simple and efficient method to control and confirm the quality and the stability of biological activity of the TME.     

Synthesis,Crystal Structure,and Selected Properties of [Au(S2CNH2)2]SCN: A Precursor for Gold Macro-Needles Consisting of Gold Nanoparticles Glued by Graphitic Carbon Nitride

A new preparation route is developed for the synthesis of needle-like crystals of [Au(S₂CNH₂)₂]SCN, which avoids disproportionation of the Au^I salt used as a starting material. In the crystal structure, the two crystallographically independent Au^III centers are in a square-planar environment of two S₂CNH₂ ligands. The Hirshfeld surface analysis reveals the presence of noncovalent intermolecular S⋅⋅⋅S interactions, which are essential for the spatial arrangement of the molecules. Density functional theory (DFT) calculations including dispersion and damping corrections result in a unit cell volume very close to the value determined experimentally. Thermal decomposition in an inert atmosphere generates black needles with lengths of up to 500 μm. X-ray powder diffraction and pair distribution function analyses demonstrate that the needles are composed of nanosized crystals with a volume-weighted average domain size of 20(1) nm. According to results of X-ray photoemission experiments, the black needles are covered by a nitrogen-rich carbon nitride with composition near (CN)₂N. ¹³C solid-state NMR investigations indicate that two different carbon species are present, with signals corresponding well to heptazine units as in melon and triazine units as in poly(triazin imide) type compounds. Scanning transmission electron microscopy tomography evidences that the needles are composed of slightly elongated nanoparticles.     

Dynamics of water in real space and time

Owing to marked advances in instrumentation in X-ray and neutron scattering the time-dependent pair correlation function, the Van Hove function, can now be determined by inelastic X-ray and neutron scattering measurements. The local dynamics of water in real space and time is visualised by this approach. We discuss how the dynamic properties, such as viscosity and diffusion, can be elucidated through the Van Hove function of water.     

Ion pair assisted micro matrix solid phase dispersion extraction of alkaloids from medical plant

A novel micro matrix solid phase dispersion method was successfully used for the extraction of quaternary alkaloids in Phellodendri chinensis cortex. The elution of target compounds was accomplished with sodium hexanesulfonate as the eluent solvent. A neutral ion pair was formed between ion-pairing reagent and positively charged alkaloids in this process, which was beneficial for selectively extraction of polar alkaloids. Several parameters were optimized and the optimal conditions were listed as follows: silica gel as the sorbent, silica to sample mass ratio of 1:1, the grinding time of 1 min. The exhaustive elution of targets was achieved by 200 µL methanol/water (9:1) containing 150 mM sodium hexane sulfonate at pH 4.5. The method validation covered linearity, recovery, precision of intraday and interday, limits of detection, limits of quantitation, and repeatability. This established method was rapid, simple, environmentally friendly, and highly sensitive.